|
Products
Photothermal systems
Based on Photothermal Common-Path Interferometer (PCI) concept
The instrument
|
- Detects the thermal effect of absorption.
- Insensitive to scattering.
- Has moderate 3D resolution:
- test substrate behind the coating, interface between bonded parts
- make 2D or 3D maps of absorption patterns
- Can be used to monitor induced, time-dependent absorption:
- gray tracks,
- laser-induced transparency (bleaching),
- initial stages of optical damage, etc.
|
|
|
|
|
 |
Industrial Solano systems (Solano housing temporarily unavailable, completely replaceable with the Quad design)
- Based on Solano enclosure design
- Noise/vibration isolation
- LabVIEW software
- Extended automation of standard tests
- Individually designed sample holders
|
|
|
|
Photothermal Solano systems |
|
Item |
Price |
 |
|
Main unit with set of special holders and standard accessories |
please, call |
|
Motorized 1"x1"x1" (25x25x25mm) motorized XYZ scanning unit |
please, call |
|
Motorized 2"x2"x2" XYZ scanning unit (replaces manual) |
please, call |
|
Set of matching optics for one pump port instrument (attenuator, mirrors and
telescope) |
please, call |
|
Additional photodetector (for testing coatings at design angle of incidence) |
please, call |
|
Data acquisition software (executables and code, pre-installed or with installation support) |
$1500 |
|
Documentation with general installationn instructions |
free |
|
2 months of free technical support over phone and e-mail |
free |
|
12 months warranty on parts and labor |
free |
|
on-site installation and training |
negotiable |
|
Shipping FCA Hilo, HI |
please, contact FedEx or UPS |
| |
Attention: Prices shown above are for United States customers only. For other countries please apply to our distributors.
 |
|
Accessories |
|
Item |
Model/Supplier |
Price |
|
|
Spare holders for 1" optics |
-/Stanford Photo-Thermal Solutions |
Included with main unit |
|
Mounted pinhole, for
alignment |
-/Stanford Photo-Thermal Solutions |
Included with main unit |
|
Calibration standards |
-/Stanford Photo-Thermal Solutions |
Included with main unit |
|
Lock-in amplifier* |
SR810/SRS |
$4150** |
|
Optical chopper* |
MC2000/Thorlabs |
$1200** |
|
Power meter with 10mW-10W
sensor* |
PM100USB/Thorlabs; S310C/Thorlabs |
$1121** |
|
* suggested
third-party electronics. SPTS can equip the system with
factory tested set of
electronics. Check the
price |
|
** list price for US customers at a company website, May 12, 2015. | |
|
|
 |
|
|
© 2005-2015 All rights reserved |
|
